Nortel Certifications in Network computing is an Information Technology (IT) professional certification on Nortel products and IEEE standard technologies. The Nortel Certification tests are administered by a Prometric test center. Nortel Training is done by Nortel training partners like Global Knowledge.
The two major levels of certifications are specialist, and Expert. Within each level there are three sublevels; technology, support, and design.
Specialist Certifications
Nortel Certified Technology Specialist (NCTS) - The Technology certification is a starting point for validating your education of basic technology knowledge, and creats a good foundation to build on for all professional certifications.
Nortel Certified Support Specialist (NCSS)
Nortel Certified Design Specialist (NCDS)
Expert Certifications
Nortel Certified Technology Expert (NCTE)
Nortel Certified Support Expert (NCSE)
Nortel Certified Design Expert (NCDE)
Architect Certification
Nortel Certified Architect (NCA)
Tuesday, September 9, 2008
Monday, September 8, 2008
Importance of IT Certification
Certifications are globally accepted means of establishing as well as assessing the essential set of credentials required for a job. They are hard evidence that you are competent enough to perform the tasks assigned (or could be assigned in future) to you. At the same time, they provide the management with an internationally accepted benchmark against which both current and prospective employees can be assessed.
And it’s no different in the IT industry. Getting certified in relevant IT technology can help enhance your career prospects (greater remuneration, more challenging job profiles, promotions, etc.), gain more respect, and increase job security. The importance that companies attach to certification has increased so much that in some cases companies are specifically asking for certified people. The reason for this is twofold. First, certifications are becoming industry standards vis-à-vis skill assessment. Second, certifications are objective measurements of skills and hence easy to use when it comes to comparing and contrasting the talent pool. In some cases it becomes the critical distinguishing factor when candidates have similar skill sets and experience.
More certifiations,visit http://www.testpassport.com
And it’s no different in the IT industry. Getting certified in relevant IT technology can help enhance your career prospects (greater remuneration, more challenging job profiles, promotions, etc.), gain more respect, and increase job security. The importance that companies attach to certification has increased so much that in some cases companies are specifically asking for certified people. The reason for this is twofold. First, certifications are becoming industry standards vis-à-vis skill assessment. Second, certifications are objective measurements of skills and hence easy to use when it comes to comparing and contrasting the talent pool. In some cases it becomes the critical distinguishing factor when candidates have similar skill sets and experience.
More certifiations,visit http://www.testpassport.com
Friday, September 5, 2008
NORTEL 922-090 EXAM DEMO
NORTEL 922-090 Communication Server 1000 Rls.5.0 & IP Networking Design
1. You have been asked to engineer an IP Peer Networking solution for a Communication Server (CS) 1000 Rls. 5.0network. The customer requirements include a centralized numbering plan arrangement, and they want to use SIPTrunking. What component is required as part of the centralized numbering plan for the network?
A. Network Connect Service
B. H.323 Gatekeeper
C. Terminal Proxy Server
D. Network Routing Service
Answer: D
2. You have been asked to engineer an IP Peer networking solution for a Communication Server (CS) 1000 Rls. 5.0network. The customer requirements include a centralized numbering plan arrangement using trunks with TransportLayer Security (TLS) enabled. Which components are required as part of this solution for the network? (Choose two.)
A. SIP Proxy Server
B. H.323 Gatekeeper
C. Terminal Proxy Server
D. Network Routing Service
Answer: AD
3. A customer is looking to take advantage of the flexibility that a Nortel Solution provides them. They currently have aCommunication Server (CS) 1000 Rls. 4.5 network with eight PBX systems connected via IP Peer Networking and theH.323 Protocol. Which options are valid when migrating the customer’s network to SIP trunking between the sites?(Choose three.)
A. Add SIP Access Ports to each CS 1000 system on the network to enable SIP Trunking.
B. Add SIP Access Port Licenses to each of the existing NRS Platforms on the network.
C. Enable the SIP Proxy Service on each of the CS 1000 Signaling Server Gateways.
D. Enable and configure SIP Redirect/Registrar Services on the existing Network Routing Servers (NRS).
E. Enable and configure the SIP Gateway Services on the various CS 1000 Signaling Server system endpoints.
Answer: ADE
4. Which two statements most accurately describe the functions of the Media Gateway Controller (MGC) card in aCommunication Server (CS) 1000E Rls. 5.0 system? (Choose two.)
A. The MGC supports peripheral cards for TDM services.
B. The MGC provides basic call processing functions for the CS 1000E.
C. The MGC provides a gateway controller for IP media gateways in the CS 1000E.
D. The MGC supports PRI/PRI2/DTI/DTI2 trunks, BRI trunks, D-channels and clock controllers.
Answer: CD
5. A customer is deploying a Communication Server 1000E system and has requested that the system be engineered asHigh Availability. What is required to consider the system High Availability? (Choose two.)
A. Software package 405
B. Software package 410
C. Dual Signaling Servers
D. Alternate Call Servers with automated database replication
E. Dual Call Processors using a High Speed Pipe for database synchronization
Answer: BE
1. You have been asked to engineer an IP Peer Networking solution for a Communication Server (CS) 1000 Rls. 5.0network. The customer requirements include a centralized numbering plan arrangement, and they want to use SIPTrunking. What component is required as part of the centralized numbering plan for the network?
A. Network Connect Service
B. H.323 Gatekeeper
C. Terminal Proxy Server
D. Network Routing Service
Answer: D
2. You have been asked to engineer an IP Peer networking solution for a Communication Server (CS) 1000 Rls. 5.0network. The customer requirements include a centralized numbering plan arrangement using trunks with TransportLayer Security (TLS) enabled. Which components are required as part of this solution for the network? (Choose two.)
A. SIP Proxy Server
B. H.323 Gatekeeper
C. Terminal Proxy Server
D. Network Routing Service
Answer: AD
3. A customer is looking to take advantage of the flexibility that a Nortel Solution provides them. They currently have aCommunication Server (CS) 1000 Rls. 4.5 network with eight PBX systems connected via IP Peer Networking and theH.323 Protocol. Which options are valid when migrating the customer’s network to SIP trunking between the sites?(Choose three.)
A. Add SIP Access Ports to each CS 1000 system on the network to enable SIP Trunking.
B. Add SIP Access Port Licenses to each of the existing NRS Platforms on the network.
C. Enable the SIP Proxy Service on each of the CS 1000 Signaling Server Gateways.
D. Enable and configure SIP Redirect/Registrar Services on the existing Network Routing Servers (NRS).
E. Enable and configure the SIP Gateway Services on the various CS 1000 Signaling Server system endpoints.
Answer: ADE
4. Which two statements most accurately describe the functions of the Media Gateway Controller (MGC) card in aCommunication Server (CS) 1000E Rls. 5.0 system? (Choose two.)
A. The MGC supports peripheral cards for TDM services.
B. The MGC provides basic call processing functions for the CS 1000E.
C. The MGC provides a gateway controller for IP media gateways in the CS 1000E.
D. The MGC supports PRI/PRI2/DTI/DTI2 trunks, BRI trunks, D-channels and clock controllers.
Answer: CD
5. A customer is deploying a Communication Server 1000E system and has requested that the system be engineered asHigh Availability. What is required to consider the system High Availability? (Choose two.)
A. Software package 405
B. Software package 410
C. Dual Signaling Servers
D. Alternate Call Servers with automated database replication
E. Dual Call Processors using a High Speed Pipe for database synchronization
Answer: BE
Thursday, September 4, 2008
Nortel 920-481 Certification Q&A (2)
6. A customer has CallPilot Rls. 5.0 servers located in several locations. They use Active Directory to track employees’information. They would like to have a single administrator for all locations and use the data in Active Directory. Whichtwo features/services would accomplish this? (Choose two.)
A. My CallPilot
B. pcAnywhere
C. CallPilot Manager
D. Directory synchronization
Answer: CD
7. A growing company is considering the deployment of a CallPilot Rls. 5.0 solution on their Private Branch Exchange(PBX) network that is using an Electronic Switched Network (ESN) dialing plan. However, they are concerned thatdeploying a CallPilot solution may require changes to their PBX network because the PBX is currently running close toits engineering capacity limit. Which data is required to determine if the network can handle the anticipated messagingtraffic?
A. trunk utilization data
B. switch utilization data
C. channel utilization data
D. Trunk Group Access Restriction (TGAR) data
Answer: A
8. A customer plans to install multiple CallPilot Rls. 5.0 servers and a separate web server for CallPilot administrationand My CallPilot application into their Private Branch Exchange (PBX) network. They want to use Application Builderto create a customized fax application to meet their fax needs. Once the fax application is created, they want to reusesome parts of that application in another application. Which two procedures will allow the call handling functions to beused in another application? (Choose two.)
A. Save the fax application under a different ID and assign different channels to it.
B. Save the fax application under a different ID and assign the same channels to it.
C. Copy the blocks that you want to reuse from the fax application and paste them into another application.
D. Save the group of call handling functions that you want to reuse as a separate application and import it into otherapplications.
Answer: CD
9. A customer plans to install multiple CallPilot Rls. 5.0 servers and a separate web server for CallPilot administration,My CallPilot, and CallPilot Reporter into their Private Branch Exchange (PBX) network. They want to use AudioMessaging Interface Specification (AMIS) and Enterprise Networking solutions to connect all the CallPilot servers. Theyalso require CallPilot Reporter to determine whether AMIS and Enterprise Networking have access to sufficient channelresources for the networking traffic load. Which report meets their needs?
A. Productivity report
B. Networking Activity report
C. Service Quality Detailed report
D. Open Networking Activity report
Answer: B
10. A customer has a Meridian Mail 11 that has many voice segments and fax items. They want to migrate from MeridianMail to CallPilot Rls. 5.0 to obtain the messaging functionality of CallPilot. However, they are concerned about databeing lost during the migration of the Meridian Mail to CallPilot. What is the guideline for this type of migration?
A. Perform the migration in one session, migrate all voice segments and fax items to CallPilot, and then create theapplications using Application Builder before migrating the remaining data.
B. Perform the migration in multiple sessions, migrate all voice segments and fax items to CallPilot, and then create theapplications using Application Builder before migrating the remaining data.
C. Perform the migration in one session and create call flow in CallPilot and then migrate voice segments and fax itemsfrom Meridian Mail to import into applications.
D. Perform the migration in multiple sessions, create call flow in CallPilot, and then migrate voice segments and faxitems from Meridian Mail to import into applications.
Answer: B
A. My CallPilot
B. pcAnywhere
C. CallPilot Manager
D. Directory synchronization
Answer: CD
7. A growing company is considering the deployment of a CallPilot Rls. 5.0 solution on their Private Branch Exchange(PBX) network that is using an Electronic Switched Network (ESN) dialing plan. However, they are concerned thatdeploying a CallPilot solution may require changes to their PBX network because the PBX is currently running close toits engineering capacity limit. Which data is required to determine if the network can handle the anticipated messagingtraffic?
A. trunk utilization data
B. switch utilization data
C. channel utilization data
D. Trunk Group Access Restriction (TGAR) data
Answer: A
8. A customer plans to install multiple CallPilot Rls. 5.0 servers and a separate web server for CallPilot administrationand My CallPilot application into their Private Branch Exchange (PBX) network. They want to use Application Builderto create a customized fax application to meet their fax needs. Once the fax application is created, they want to reusesome parts of that application in another application. Which two procedures will allow the call handling functions to beused in another application? (Choose two.)
A. Save the fax application under a different ID and assign different channels to it.
B. Save the fax application under a different ID and assign the same channels to it.
C. Copy the blocks that you want to reuse from the fax application and paste them into another application.
D. Save the group of call handling functions that you want to reuse as a separate application and import it into otherapplications.
Answer: CD
9. A customer plans to install multiple CallPilot Rls. 5.0 servers and a separate web server for CallPilot administration,My CallPilot, and CallPilot Reporter into their Private Branch Exchange (PBX) network. They want to use AudioMessaging Interface Specification (AMIS) and Enterprise Networking solutions to connect all the CallPilot servers. Theyalso require CallPilot Reporter to determine whether AMIS and Enterprise Networking have access to sufficient channelresources for the networking traffic load. Which report meets their needs?
A. Productivity report
B. Networking Activity report
C. Service Quality Detailed report
D. Open Networking Activity report
Answer: B
10. A customer has a Meridian Mail 11 that has many voice segments and fax items. They want to migrate from MeridianMail to CallPilot Rls. 5.0 to obtain the messaging functionality of CallPilot. However, they are concerned about databeing lost during the migration of the Meridian Mail to CallPilot. What is the guideline for this type of migration?
A. Perform the migration in one session, migrate all voice segments and fax items to CallPilot, and then create theapplications using Application Builder before migrating the remaining data.
B. Perform the migration in multiple sessions, migrate all voice segments and fax items to CallPilot, and then create theapplications using Application Builder before migrating the remaining data.
C. Perform the migration in one session and create call flow in CallPilot and then migrate voice segments and fax itemsfrom Meridian Mail to import into applications.
D. Perform the migration in multiple sessions, create call flow in CallPilot, and then migrate voice segments and faxitems from Meridian Mail to import into applications.
Answer: B
Tuesday, September 2, 2008
Nortel 920-481 Certification Q&A (1)
1. Your customer relies heavily on the CallPilot servers to exchange messages between sites. Due to the volume of thetraffic, the company needs to account for each department’s usage. Which bill-back report would you recommend thecompany regularly generate?
A. Network Usage to track long distance charges
B. Messaging Usage to track activity on mailboxes
C. DTT Usage to track telephone activity to user or department
D. Remote Notification (RN) Usage to track the cost of outcalling by mailbox
Answer: A
2. A customer has a CallPilot system on a 1002rp server with 2 MPB16-4 cards. The customer has decided to migrate thesystem beyond the current 96 channels to support fax. Which hardware changes must be implemented?
A. Install an additional hard drive.
B. Remove the MPB16-4 cards and install 2 MPB96 cards.
C. Remove the associated MGate cards and the 7-drop cable.
D. Remove the RAID configuration.
Answer: B
3. A customer has moved to a new facility. A CallPilot Rls. 5.0 server will be replacing a Meridian Mail with aSymposium Call Center Server. What is the required step?
A. Collect the user data and voice segment data.
B. Collect menu segments and voice segments.
C. Collect announce segments and menu segments.
D. Collect the voice segment data and menu call flow data.
Answer: A
4. A customer plans to install multiple CallPilot Rls. 5.0 servers into their Private Branch Exchange (PBX) network.They are concerned that unauthorized users may hack the mail system and hear confidential information. Which twosecurity measures should you recommend to increase mailbox security? (Choose two.)
A. Increase the password length for mailboxes.
B. Force mailbox users to use a prefix on changed passwords.
C. Force the mailbox users to use both letters and numbers for their passwords.
D. Increase the number of mailbox password changes before users can reuse passwords.
Answer: AD
5. Your customer plans to install a new CallPilot Rls. 5.0 system (1005r server) on their multi-site Private BranchExchange (PBX) network. They have Microsoft Office XP installed on the client desktops. They want to use a CallPilottool that will allow users to send CallPilot messages using the voice and fax number fields directly from MicrosoftOutlook Contacts both to CallPilot and non-CallPilot users. Which application provides this functionality?
A. My CallPilot
B. CallPilot Reporter
C. Desktop Messaging
D. Lotus Notes or Microsoft Outlook
Answer: C
A. Network Usage to track long distance charges
B. Messaging Usage to track activity on mailboxes
C. DTT Usage to track telephone activity to user or department
D. Remote Notification (RN) Usage to track the cost of outcalling by mailbox
Answer: A
2. A customer has a CallPilot system on a 1002rp server with 2 MPB16-4 cards. The customer has decided to migrate thesystem beyond the current 96 channels to support fax. Which hardware changes must be implemented?
A. Install an additional hard drive.
B. Remove the MPB16-4 cards and install 2 MPB96 cards.
C. Remove the associated MGate cards and the 7-drop cable.
D. Remove the RAID configuration.
Answer: B
3. A customer has moved to a new facility. A CallPilot Rls. 5.0 server will be replacing a Meridian Mail with aSymposium Call Center Server. What is the required step?
A. Collect the user data and voice segment data.
B. Collect menu segments and voice segments.
C. Collect announce segments and menu segments.
D. Collect the voice segment data and menu call flow data.
Answer: A
4. A customer plans to install multiple CallPilot Rls. 5.0 servers into their Private Branch Exchange (PBX) network.They are concerned that unauthorized users may hack the mail system and hear confidential information. Which twosecurity measures should you recommend to increase mailbox security? (Choose two.)
A. Increase the password length for mailboxes.
B. Force mailbox users to use a prefix on changed passwords.
C. Force the mailbox users to use both letters and numbers for their passwords.
D. Increase the number of mailbox password changes before users can reuse passwords.
Answer: AD
5. Your customer plans to install a new CallPilot Rls. 5.0 system (1005r server) on their multi-site Private BranchExchange (PBX) network. They have Microsoft Office XP installed on the client desktops. They want to use a CallPilottool that will allow users to send CallPilot messages using the voice and fax number fields directly from MicrosoftOutlook Contacts both to CallPilot and non-CallPilot users. Which application provides this functionality?
A. My CallPilot
B. CallPilot Reporter
C. Desktop Messaging
D. Lotus Notes or Microsoft Outlook
Answer: C
How to Become an IT Developer
In today’s business climate, the IT developer plays an essential role in the evolution of a company and its reach. Even more importantly, the IT developer has become a critical component in protecting the infrastructure of a company from acts of cyberterrorism. Find out more about this challenging career path by learning how to become an IT developer.
Instructions
Step1. Get educated. In order to become an IT developer, you must possess at least a bachelor’s degree, preferably with a strong emphasis in technology and management information systems. However, more and more companies are seeking candidates with advanced degrees, such as an MBA that combines a business and accounting curriculum with communications and management information systems.
Step2. Obtain a certification to underscore your understanding of information systems technology, development and applications. For instance, you might earn a Certified Software Development Professional (CSDP) from the Institute of Electrical and Electronics Engineers (IEEE) or one of several developer certifications from Microsoft.
Step3. Resign yourself to the fact that your education, training and resume (even the most perfect) may not distinguish you from the competition in this field. If you want to become an IT developer, you’ll have to be willing to set yourself apart by being engaged in a variety of networking strategies.
Step4. Get involved in Internet newsgroups, forums and special interest groups (SIGs). Actively participating in these venues allows you to demonstrate your knowledge and experience in a very public way. In fact, your signature may very well surface when others conduct Internet searches for IT developer solutions, including potential employers.
Step5. Rise above the competition by asking a vendor to recognize you as a valuable contributor to the IT community at large. For instance, Microsoft has a Most Valuable Professional (MVP) program that recognizes professionals who collaborate and present in electronic forums and print publications.
Step6. Consider contributing an article to a technical magazine or journal, whether online or in traditional print. Being published can go a long way to setting you apart from your peers and helping you to land a position as an IT developer with a reputable firm.
Step7. Attend IT conferences and even offer to speak at one if possible. Networking through this venue on your path to becoming an IT developer can be invaluable.
Step8. Post your resume on a highly visible website that offers a job database for available positions in the IT industry, such as JustTechJobs.com (see Resources below).
Instructions
Step1. Get educated. In order to become an IT developer, you must possess at least a bachelor’s degree, preferably with a strong emphasis in technology and management information systems. However, more and more companies are seeking candidates with advanced degrees, such as an MBA that combines a business and accounting curriculum with communications and management information systems.
Step2. Obtain a certification to underscore your understanding of information systems technology, development and applications. For instance, you might earn a Certified Software Development Professional (CSDP) from the Institute of Electrical and Electronics Engineers (IEEE) or one of several developer certifications from Microsoft.
Step3. Resign yourself to the fact that your education, training and resume (even the most perfect) may not distinguish you from the competition in this field. If you want to become an IT developer, you’ll have to be willing to set yourself apart by being engaged in a variety of networking strategies.
Step4. Get involved in Internet newsgroups, forums and special interest groups (SIGs). Actively participating in these venues allows you to demonstrate your knowledge and experience in a very public way. In fact, your signature may very well surface when others conduct Internet searches for IT developer solutions, including potential employers.
Step5. Rise above the competition by asking a vendor to recognize you as a valuable contributor to the IT community at large. For instance, Microsoft has a Most Valuable Professional (MVP) program that recognizes professionals who collaborate and present in electronic forums and print publications.
Step6. Consider contributing an article to a technical magazine or journal, whether online or in traditional print. Being published can go a long way to setting you apart from your peers and helping you to land a position as an IT developer with a reputable firm.
Step7. Attend IT conferences and even offer to speak at one if possible. Networking through this venue on your path to becoming an IT developer can be invaluable.
Step8. Post your resume on a highly visible website that offers a job database for available positions in the IT industry, such as JustTechJobs.com (see Resources below).
Monday, September 1, 2008
How to Get Nortel Certification
Nortel offers numerous technical certifications, ranging from customer service to LAN and wireless network management. Nortel makes it easy to expand your career horizons with flexible training schedules and online courses. Sharpen your pencil and get ready to jump start your career with a Nortel certification.
Instructions
Step1. Explore the various career path offerings from architect to specialist studies. Nortel offers three career tracks: “Design,” “Support” and “Technology,” with three levels of expertise in each.
Step2. Consider the Design track if you’ll be engineering the use of applications. Support certifies expertise in troubleshooting and operation of software systems while Technology is the installation and maintenance of the system.
Step3. Read additional information about each certification track in the “Support and Training” tab on the Nortel website. Take a quick self-assessment exam to determine the level of exam that fits you best.
Step4. Track your progress towards different Nortel certifications by signing into Nortel’s CertManager. CertManager records each exam taken and credits it towards the many certification options available. This makes setting and attaining goals easier.
Step5. Attend a Nortel Technology Solutions Academy for lessons and exam assistance. Work with others in your field to solve complex problems and aid in preparation. TNetwork and open opportunities with outside companies.
Step6. Register for your exam through the Prometric website. Prometric administers all exams, accepts registration fees and provides training material.
killtest help you pass any certifications.
Instructions
Step1. Explore the various career path offerings from architect to specialist studies. Nortel offers three career tracks: “Design,” “Support” and “Technology,” with three levels of expertise in each.
Step2. Consider the Design track if you’ll be engineering the use of applications. Support certifies expertise in troubleshooting and operation of software systems while Technology is the installation and maintenance of the system.
Step3. Read additional information about each certification track in the “Support and Training” tab on the Nortel website. Take a quick self-assessment exam to determine the level of exam that fits you best.
Step4. Track your progress towards different Nortel certifications by signing into Nortel’s CertManager. CertManager records each exam taken and credits it towards the many certification options available. This makes setting and attaining goals easier.
Step5. Attend a Nortel Technology Solutions Academy for lessons and exam assistance. Work with others in your field to solve complex problems and aid in preparation. TNetwork and open opportunities with outside companies.
Step6. Register for your exam through the Prometric website. Prometric administers all exams, accepts registration fees and provides training material.
killtest help you pass any certifications.
Subscribe to:
Posts (Atom)